Go back

How to Use the 1RM Continuum for Strength Training

from Between 2 Racks

45m 46s

How to Use the 1RM Continuum for Strength Training

The 1RM continuum is a vital educational and practical tool for coaches to understand how intensity—not just volume or reps—drives training responses. Rooted in research from the 1980s and refined by Charles Pollock and Luke Lege, it defines training outcomes by intensity zones: relative strength (85–100% or 1–5 reps), hypertrophy (70–78% or 8–12 reps), and strength endurance (13+ reps). While the standard continuum provides a reliable baseline, real-world application requires adaptation due to individual differences in training age and fiber recruitment. Over time, athletes become more efficient at recruiting fast-twitch fibers, causing a decline in performance at high intensities, which means the continuum must be updated through performance tracking. This tool is most effective for compound, multi-joint exercises and should be avoided in metabolic or single-joint training, where fatigue and volume differ significantly. Coaches must use percentages rather than fixed reps to maintain consistency and precision, especially in power or advanced phases. Tracking actual performance over time allows for accurate adjustments, ensuring training prescriptions align with individual capabilities. For novices, training at moderate reps builds work capacity and fatigue tolerance, preparing them for more advanced intensity work. Ultimately, the 1RM continuum is not a rigid rule but a dynamic, evidence-based guide that, when paired with data-driven observation, enables more effective and individualized strength programming.

Transcription

7103 Words, 38177 Characters

English
Welcome back to Between Two Racks. This week's episode we're going to do a lesson on the 1RM continuum. So let's kick it. Welcome to my home office. When we first moved in it was supposed to be both of our offices, but we quickly found out that this room runs a little bit too hot for Steph's liking. So he's set up out in another area where he has his own fan and his own AC unit. But where if you're watching this video where you guys your point of view is a couch. So Steph frequently comes in and sits on the couch when he needs to work with me or we have something we're brainstorming on. But this is my office set up. So back to being educational. I remember back in I believe it was 2016 not even 2017 because we were getting ready for the primate training camp the first course we did in California. And you came to me and you said that you wanted to design a rep schemes and a 1RM continuum sheet. And you want it all the information on one sheet to use as a tool for yourself and also to provide to coaches. And I remember going back to like when I first put it together people were buying the posters and we still see people with the posters in the back of their offices or in their facilities. I remember I actually designed that in Photoshop. I was doing everything in Photoshop back then. Anyway I remember it being super hard to do. Well it was just like the alignment and you wanting everything so perfectly spaced that made it a little bit more difficult than I had originally anticipated. But we still have it. It's still something we provide in our courses and it's in the rep schemes database on our website. But I do see it as something that is an extremely useful tool for coaches and trainers to understand. So you, if you're just sitting down with a new coach and they have no idea what the 1RM continuum is, how do you explain it to them? So in 1984 Davies and McDonough in one of the research paper that they released basically the main idea from that paper was that the intensity so the load is what really dictates the training response. And we know that the intensity and or the load is highly correlated to the amount of repetitions you're doing at least if you're training at RM load. So when you understand that the stimulus of intensity as such an important impact on the training response you're going to get from that training session, well then you can't deny the importance of load and the being precise with the amount of load and or repetitions you're doing in your training. So with that in mind I remember when I was studying it from my bachelor's degree at University of Montreal at a class called I mean translating from French but it translates to methods and principles of training and this course was taught by Luke Lege and Luke Lege was a pretty big endurance training like researcher in Quebec. Like even I remember as a kid in elementary school one of the Fizzad tests that we had was the Lege Bushet test which was a test that he co-authored so you can kind of like a well-known guy and Charles Pollock in he had started a masters in the early 90s at University of Montreal and he started his masters with Luke Lege and what they worked on together was a a new updated one RM continuum if you want so at the time if I my memory serves me well it was about seven or eight different one RM continuum out there so the percentage was different between yeah so like so for example you have you have certain one RM continuum where sometimes it's small details but let's say some of them sometimes 10 repetition is 75% whereas us 10 repetitions 74% like the the only one where it's always the same would be all of them one rep would equal 100% and for the most part 20 reps would always equal about 60% but there's some slight variations in the middle reps like from one to from two to 19 basically depending on the one RM continuum you used but I mean it was very simple all that Luke Lege in Charles Pollock and did was they basically took the seven or eight most popular and the average them out that's the intensity that came out off of that one specifically and and because this one I had just started learning from Charles because I read from Charles and muscle media 2000 in 1995 this course was in 1998 so I had already had exposures to Charles but that was the first time ever that I had seen that version of the one RM continuum which was established in 1991 and then with the one RM continuum so I know you're saying that the load and the percentage that's like the essence of it but then you have like on ours you have the strength qualities associated to the different reps is that something that was also always applied? No no that was more the the strength quality association to the intensity zone this is something that I first learned from Ian King but the way I use it it's mostly what Charles Pollock and did with PICP because the thing about the strength qualities is different authors have different terms in fact if you look at really old articles from Charles the strength quality functional hypertrophy didn't even call it that was it just hypertrophy? No it was called something like a longer I'm not don't take my word 100% for it but it was something along the lines of functional strength okay which doesn't really make sense to me because relative strength is per se would be more functional so maybe that's why it kind of changes it over the course of the years but I remember I still have notes and pages of material from the early 2000 when I first started education with them where it says functional strength for that so it's kind of like so it's not these four strength qualities that I that we kilo associate to the one I'm continuum are a direct reflection of what I learned working and studying under Charles Pollock and it's not necessarily like a widely accepted thing because typically typically you'll find muscular endurance you'll find maximal strength and you'll find hypertrophy as a biomotor abilities from strength training this one is just a little bit more segmented where you have relative strength you have functional hypertrophy which to me is very similar to absolute strength and then you have hypertrophy which is just more typical you know a blend of myo-fibreller and sarcoplasmic hypertrophy and then you have strength endurance wherein this one I am it's like from 13 to 20 repetitions but in reality it can be 30 50 100 reps like you even have authors like Tutor Bampa for example easy really big proponent depending on the sport of course but if you're a high endurance type of sport athlete like he would sometimes prescribe 100 200 reps for a strength endurance work it becomes after a certain amount of time it gets harder to associate a percentage to the right absolutely I mean yeah the the further away you go from one rep the more you're starting discrepancy between people that's why typically when I'm gathering estimated 1RM to build a next macro I always take numbers on block two so at least the average intensity of block two is higher so the reps are technically a little closer to a single rep but the most accurate will be your intensification to numbers but the problem is of course you don't have all of the exercises and just one intensification so you still need to account for the accumulation to numbers as well it's just that there might be a slight bigger margin of error depending on who you're training some people tends to be more like slow to which high work capacity people so the higher rep continuum numbers will correlate pretty well but the majority of people especially if your training age is higher if you can get six reps or less you're typically gonna have a way more accurate estimate and value and I think it's extremely important clarification to make that when you're talking about the 1RM continuum this applies to the A-Series compound movements absolutely everything about every 1RM continuum that exists is pulled off of compound multi-joint barbell movements as soon as you throw in like [BLANK_AUDIO] pathways or risk curls or like it won't apply to numbers or way all over the place because now you were targeting one You know individual muscles structure and this there can be a lot of variation of fiber types between individuals So it becomes very less appropriate than a compound multi joint movement where you have the fixator stabilizers prime movers antagonists blah blah blah all of this are involved in the movement. So then you the the individuality between people tends to dissipate a little bit more So you as a coach. I know you haven't memorized you have all the rep schemes memorized you have the one arm continue a memorized But for newer coaches or coaches that aren't as familiar with this How do you use it within your planning as the tool? So let's go back to the strength quality aspect So you have your your one arm continuum. So one rep is 100% intensity and then we stop or continue them at 20 reps Which is 60% of intensity Okay, if you're a pure novice You you'll start developing strength at the onset of training at 60% of one arm As you become a little bit more advanced with training. So let's say you're six months into your training like proper training Then the minimum intensity threshold moves to 70% Okay, like if you're if you've been training well for over a year and you're training at 60% I'm not saying you're not going to gain strength, but the The percentage of or the potential for a positive strength responds diminishes, okay? So that's why in our foundation program design course with the a series The rep window is 1 to 12 Because 1 to 12 represents 70 to 100 percent of 1 rm Which is after the introductory period? This is where you need to spend the bulk of your time training to push a positive training response Now going back to the strength quality and going back to what I said about Davies of McDonough in 1984 where they were saying that The intensity the load imposed upon the muscle is what gives you the training response So then I need to know that Well if I want a training session to move the needle on relative strength Well, what is the intensity zone associated through relative strength in terms of the outcome of training? So that becomes 85 to 100 percent which translates to 1 to 5 reps So I know that if I'm writing a phase and I want that phase To give me relative strength as the main training outcome I need a load between 85 to 100 or between 1 to 5 reps That's a if I want hypertrophy to be the main signal Then I want an intensity between 70 and 78 percent or 8 to 12 reps If I want functional hypertrophy, which is a blend of both I Want to be between 78 in any 3 percent which is 6 to 8 reps and then if I want straight endurance Well, it's 13 reps or more up to 20 or up to 30 50 whatever you want But that's what it is right, but it's just rare for me and Foundational strength training that I'll go on a big primary compound move above 12 repetitions Simply because I don't tend to train strain endurance very often with that clientele Okay, so it's just like if they have a sport or if they're pure gen pup Then I'll have phases of strength endurance because it can benefit them But some ones seeking predominantly strength and or size. I'm not really going to spend phases training strain endurance So that's why it's it's not that it's a useless Strength quality. It's just not one that we use very often in our standard strength. Yeah for long-term For long-term development. Yeah, we'll use it in like in a fat less specialization In certain hypertrophy and mesocycles were really trying to drive metabolic stress, but it's not something we use very much I think as the another Really important part is to understand and this is something where I kind of see misuses of this is you keep bringing up How obviously the load is so associated to this and the intensity but If your loading isn't correct. So if you're massively under shooting Loads all the time or you're always missing reps That skews how you can actually properly apply this with clients Yeah, so Here's the thing so what gets complicated sometimes is Strength coaches That do not use percentages They tend to use rm loads Which means that you write seven reps on the sheet Well, I'm going to train to seven rm Okay, and that's typically 80% but it doesn't matter like most of these coaches don't even care about the percentages but the problem is For most training for a really long term If the only training style you ever do is training at rm load You're eventually going to crash and burn and there's going to be a point of diminishing return Because it's going to become harder and harder to monitor fatigue Or monitor training loads and then Once you get interested in power development Then you quickly realize that basing an entire training philosophy only on rm load Becomes a huge limiting factor because if I'm training power specifically, let's say in an intensification phase And I'm focusing more on explosive string development And I'm doing four reps. Let's say well, I'm not doing four reps at a four rm load It's that's irrelevant. So now I need to associate a percentage of intensity To that four repetitions that has nothing to do with 88% of one rm in the foreign load Then on top of it if I want to train with buffers to to focus on building more inter muscular coordination or technical rehearsal Or work capacity. Well, I might be training at five reps But it doesn't mean I'm going to train at 85% of one rm So for me, I became really really really way more interested in using the one rm continuum around 2002-ish when I started being a little bit more interested on Training outside of just the hypertrophy world and then I'm like, well, I cannot I cannot do everything based off of rm It's so it's so misleading. There's too many mistakes But I don't I'm sorry you wanted to say so I'm not going you're good, but you have to be careful too because This the one I'm continuing on it's only a guide. Yeah, it's not necessarily an absolute. So I use it as a guide And then you monitor over time So for example, I have a new client. I don't know anything about the client. I do the first 12 weeks I'm not very specific with the actual rm load or intensities at that point like I don't I don't know the person I'll go with a basic structure It fills in the blanks right he puts it in his reps and the load and on and on So then at the at the end of the first 12 weeks then I pull the estimated one rm values. Okay So now I have Estimated one rm values from training That I'll use to prescribe the next training So I'm comparing apples to apples because I have training estimated one rm To help me guide the training of the next macro. So it's more relevant So so let's say now I've developed a new estimated one arm on the squat And now I'm moving on to a new phase and now it's a completely different rep scheme So instead of guessing huh now I I went from four repetitions in my last intensification and now I'm going to 10 repetitions Hmm Not sure. I'll just I'll wing it session one Then you realize that session one you didn't really you kind of fail you didn't really hit the spot Because there was only let's say three or four sets and you didn't read that time to readjust So then session two you start maybe more conservative and then oh you finished the last set But you kind of overdid it and on the last set he crashed and he didn't perform the 10 reps and we perform eight And that was too much and then maybe the third session you kind of nailed the loading and then the fourth session Guess what you change phase? So then you realize you basically you basically messed around for for an entire meso cycle figuring out the weight But what I do instead is okay now I'm moving from four reps Which was a peak load of 88% of one rm Now I'm re-establishing a new estimated one I am. Now I'm trying at 10 reps and reps is 74%. So all I do is now I take 74% of the New Estimated 1RM and this is my target peak load for that first session on that exercise, which means for the last set. - For that last set, 'cause I'm still using step loading. So if I'm doing five sets of 10, for example, well, my first set will be 10% less than the peak weight that I'm going to use on the fifth set. And are you still even using that in session one? - Yeah, yeah, yeah, absolutely. And then, but here's the thing. So now you need to be a coach. And what I mean by this is, okay, he was not able to perform 10 reps. He only performed eighth. That was a peak and that's all he could do. And then you do the second session, the same kind of thing happens, it was not just a fluke 'cause that's what I always tell coaches, you cannot take one situation and freak out and change everything and be like, he's not what I thought he was. No, it might just be a fluke, it might be circumstantial. You do it again. Now there's twice something happens. Now there's a trend. So what you're going to realize sometimes is, okay, that person, now I know that 74%, it's not 10 reps for that person. 74% is eight reps, which happens. - Comprehensive. - Yeah, so we teach this in the comprehensive program design course because what people need to realize is, the 1RM continuum that we use the leisure and buddy came from 1991. It's really good, it's really accurate. And the reason why I use it is I've tested it on a bunch of my clients. And on these big compound movement, it's pretty spot on. Like I prescribe 80%, they're going to do about seven reps. It's pretty spot on. But here's the thing though, the longer you've been training well at a high level, guess what happens? The longer you train, the more efficient you become at recruiting fast switch fibers. So if you're recruiting more fast switch fiber on any fibers, on any given contraction, guess what happens? The fast switch fibers, they don't recover as fast because they fatigue quicker. So if you recruit more fast switch fiber to do a set of five, then you did five years ago, it means that you're gonna crash and burn much faster because you're predominantly using fast switch fibers. So because of this, at 85%, you won't be able to do five reps anymore. You might just be able to do four reps. Then if you've been training for 10 years at 85%, you might just be able to do three reps. So then it becomes complicated because you don't want to be so stuck in your ways of following this one or end continuum for the rest of your life and never addressing that aspect and then realizing that you're always miss interpreting the planning of the training program because if now, I'm always, so let's say I'm writing a phase with a 10 year guy where I want to write a 70% intensity phase. And because of this, I put 12 reps. Well, if he's been training for 10 years, really, really, really well, usually a 10 year training age person at 70%, they're going to be able to only do eight reps. So if I put 70% and I still plan for 12, it means that that person is not training at 70%, that person is training at 62%, 64%. - So it changes the planning of the training? - It changes the plan because now that phase becomes irrelevant for that training. The intensity becomes too low for a 10 year plus person to gain strength from the prescription. So then it becomes counterproductive. So that's why you need to keep track of this over time. So the 1RM continuum is a great starting point because one of the biggest issue that I've noticed because you have to understand when I started as a personal trainer in 1999, that sunk so out, that commercial gym I was at, we were 35 trainers, it was over 5,000 members. So I've studied and looked at a lot of trainers work with their clients. And none of them to be quite honest. Maybe a little bit more towards the end before I left for the US. But none of them really kept track of low reps, data. But when you understand that the most important thing about training is the perceived load by the nervous system that takes the training response and then progressive overload over time, well, how can you say that you're training if you're disregarding the two most important premise of training? - They're working out, as you like to say. - Yeah, they're working out, but they're not really training, they're not improving. So to me, very early on, I'm like, wait a sec, I need to keep track of this. And I can't aff-ass it. I cannot waste an entire mezzo trying to figure out a new weight. So do I claim that using the one-arm continuum is perfect all the time? No, but at least I'm using something to give me a starting point and a guide to not waste a bunch of time. - It's a tool as a coach to be able to analyze the programming, your giving clients to be able to track trends. And it goes back to a lot of that when we're not saying, like you said, this isn't an absolute, but it helps you guide your training. - I mean, I've used it on every client, I've ever trained since 2002. So to me, it's been a huge thing. - I do wanna go back too, 'cause I think it's an important part too. That's something that you haven't discussed a lot. And I know we talk about it, just being back around more Gen Pop in the gym. Is the whole use of strength endurance when you're teaching in the classes. You have a Mrs. Jones and you tell her to do eight reps at a certain weight and then she says that's hard on rep eight, but then you get her to keep going and she can get to almost 30 reps with it. So why is it that strength endurance you believe for the novice beginners is something more important to focus on? - And not sure question is asking the right question here. So what happens sometimes with the novice is their ability to recruit more units, especially high threshold more units, where now we know, like you know what kind of, it's pretty strict on this. He says that recruiting high threshold more units does not necessarily mean that you're only recruiting fast witch fibers, but at the end of the day, a novice is just not very efficient at recruiting fast witch fibers. They mostly train with slow twitch fibers at first. So that's why sometimes something for a novice can feel hard, but they can keep on going because slow twitch fibers are great fighters of fatigue. So they can keep on going and going and going. And now if they keep on going with 10 plus reps, then lactate starts accumulating and then it burns and it's that hard feeling. But I like with that kind of tell to keep on going not necessarily because I want them to improve strength and endurance, but it's because I want them to learn what it is to train close to concentric failure. But there's no point in me trying to give a five RM load to a person that has zero ability to train with fast witch fibers because if you do this, they're going to perform one rep, then they're gonna crash and then you reduce the weight by 5%, and then all of a sudden they can perform 20 reps with that load. They're just not ready for this. So at first you train with not necessarily higher reps, but you push them to go to their maximum so they can understand that. And then by doing more work and more repetitions at let's say 70% of 1 RM, then they're going to learn to train to true muscular fatigue. Their rate of progress will be much greater. And then, but then to go back to the strength endurance thing, now the strength endurance thing can become important for the gen pup, but at that point, it's more once they've built a base of inter muscular coordination, ability to recruit some fast witch fibers, they've built some strength, then you throw in strength endurance, then they're going to have a huge training response from it, and then not only are they improving all the metabolic capacities of higher capillaries, higher number of mitochondria within the cells, all these cool stuff, but they're also improving their work capacity too. So now they can do more work, recover from it. If they play sports over the weekend, they're building some type of muscular endurance that can translate to better performance and on and on, but I would only truly use strength endurance after they've built a base of regular strength. Yeah, they need that based first. Okay, but but to your point, though, I will keep, even if I write A to R, reps. And I see them train. And yes, they're, they're kind of struggling, but I know that they can do way more. I was just keep, let them keep on going. There's no point. It's like at that point in mind, the eight reps does not represent what eight reps should be representing. So keep on going because even if they perform 19 reps, so be it, at least they train close to failure and that 19 reps might be an intensity that's adequate for them to build strength anyways. So it doesn't matter. I want to go back to the actually using it as a coach and going back to the loading of the actual sessions. So I know we were looking over programs recently together. And then we were looking at how in train heroic, you can assign the percentage to different sets. When do you choose? Because I know you don't always do this. So and we know that with complex reps schemes, the percentages become even more important because that's why you're using the complex rep schemes. But when do you decide to then assign the percentage in your programming software like train heroics? So the client sees the percentage per set. It's a good question. The application of this aspect is a little bit different with my online client because 99.9% of my online clients are coaches. And a lot of them, when they pay for my services for programming, one of their side goals is to learn how I work. But me, I also want to understand how much they understand about the training process because they're coaches themselves. So I'll explain what step loading is. Then I'll program, but I'm typically not going to program the intensities for a regular phase because I want to see their load selection. I want to see if as a coach themselves, you understand that concept. And honestly, for the most part, it's all over the place. Like it's still to this day, even after I explain it, I have people doing step loads that are 40% range. Or I have people not doing step loads at all. So then I work on explaining that to them. So they can actually retain the information because sometimes I notice because I've done it in the past is if I prescribe the percentages right away, they don't necessarily learn that aspect. They just think, okay, that's what he wants me to do. And they don't overthink it. And they don't associate that necessarily to the rep or the intensity. But the times that I will literally really use it will be in power phases because then you need that precision. But then it's even because when I was doing the power in mine, it wasn't even that it was the percentage showing up there. Like it was the weight. Well, that's because, okay, that's because what training Roic does is when I plan, so let's say you're doing squats. And I want you to do like, I don't know, let's say explosive strength on squats with bands, okay. And I want you to use a 20% band tension and 50% of barbell weight, okay. Now I'll put the percentage in my trainer Roic prescription. That's a 50%. But the customer, what they're going to see on their end is the app will use the estimated one or M in the software and put the 50% right away into the, so the client per se does not necessarily necessarily know see the percentage. They just see the weight selection, see the weight selection based off of their most current estimated one arm value. And then another important caveat with the one arm continuum I believe in training overall is yes, we said that it's used on the A series compound movements. But are there phases or are there training styles where this still goes out the window? I mean, yeah, if you're training just on itemachines or mostly single joint movements about like something like fat loss specializations or hypertrophy specializations. Oh, yeah, absolutely. These modalities are not real strength training. Just like the metabolic. Yeah, you're like you're in the gym using strength training exercises, but you're not doing strength training. So now it's a different monster. Now we're working on the metabolic pathways. We're working on the developing work capacity lactate buffering capacity within the targeted muscle structure. So you can't, let's say you're doing a tricec and it's the, the rep scheme is five by 10, five by 12, five by 15, let's say, and you're 120 seconds of series time under tension. There's no way, you can use an actual 10, 12 and 15 hour and it won't work. Like you're going to crash real, real quick and your reps are going to go from well, the first, the first 12 and the first 15, you won't even be able to do it because you're going to be fatigued from the A1 movement. So you're going to go like 10, 9, 7, then by the time you go back to set number two, it's going to be even less, even less, even less. So then what happens at the end of the workout is you're white, you're completely crushed, but guess what? You didn't hit the volume target. You didn't hit the series time under tension target. And this matters because the only reason why we're doing this is to subject the muscular structure to a long metabolic stress, so that you're forced to buffer lactate and forced to increase capuilaries, increase mitochondria. So if the goal is 120 seconds, but you end up trading at 49 seconds per combined seven year tricep, well, metabolically, you're not doing the same work. Yeah, you'll be crushed, but it's not what we're looking for. So at that point, your better off start really conservative, like 50% less of what you thought you were going to use, just to make sure that you're able to maintain the series time or attention and the volume across all the sets. And then once you do this, then start challenging with the weight. It's still a good point to know your numbers and no percentages, because that is how we assign it in those specialization phases. We're saying you need to start 50% of what it would be, but if you have no idea. Yeah, but it's hard too, because you know, like in triceps, maybe the first exercise will be a real multi-joint compound movements where you have true value. But then if the second exercise is a leg press and the third one is a leg extension, I don't really know these values anyway. So it's kind of at that point, it becomes a guest and it's a more reflection. Like, you know, you've trained with me a million times and it always seems like I nailed the weight perfectly in these situations, but it's just because I've done it so much. Even like the art of coaching and this comes into play so much of, okay, you take that client through a phase, you say we're going to be conservative, we're going to start 50% less, but you should watch that first set of 50% and still as a coach, once you've put in the reps and you know it, you've done it on yourself and you've watched other clients do it, what their work capacity is and where to go from that 50% either stay or maybe, okay, it looks like they can go a little bit heavier and then still maintain it for the rest of the sets, but it just takes time and like actually seeing the grind to really know what to do with it. Then that's why also like for those of you familiar with the fat less specialization, what I like to do, especially for the more novice in that realm of training, is I like to keep a quasi, almost the exact same exercise structure between, let's say, two accumulation phase where I would be doing a GBC because now you have a little bit more of a learning curve of how you're reacting to that type of loading, whereas if my second GBC, the exercise that are completely different, then again, it's another relearning aspect, and then on a metabolic perspective, you're just not going to get as much as if, okay, now we're going back to a GBC with familiar exercise that we know, we react with that type of modality, and now because we know, let's really push it. So that's a little tip that I would give coaches, when you have more novice with fat less specialization. Okay, we're going to wrap up this episode, I want to bring it back to the 1RM continuum. Is there anything else you believe coaches should understand about this that we didn't go over? The 1RM continuum, no, the intensity. The intensity means everything. The intensity comes first. I remember in 2017, 16, when I first started training coaches on planning of volume and intensity, I would always say, okay, you choose the intensity first, and then you choose the reps, then you choose the set to know your total rep for volume manipulation. But the reason why you choose the intensity first is the intensity dictates the training response. So those strength qualities, relative strength has nothing to do with 1 to 5 reps, relative strength has all to do with 85 to 100%. 1 to 5 reps is what on average people do with 85 to 100%. But like I said earlier, people are different. Some people are more genetically fastwitch. People with a higher training age recruits more fastwitch fibers. So their 85 to 100% might not be one to five reps. It might be one to three reps. So if that's the case, now three reps does not mean the same thing that it used to mean for me. Okay. But 85% still means 85% for me. That never changes. So that's why I'm a huge fan of percentages. Even though my early mentors did not use them or did not like them, I always thought that it was a tool that you can use to add precision to not only your planning and programming, but add precision to the actual process of training in the weight room. And it allows you to make better decisions from face to face macro to macro and over a long period of time. So that's why I always remind students to yes, the rep skiing, but it's the intensity that's the true driver. Yeah. Like that's actually the most important factor of this. Yeah. The percentage of one arm is what gives you the training response. The rep might change over time, but the percentage will always be the same. I remember the first time where you taught the modified or how to customize the one arm continuum in the comprehensive seminar. The first comprehensive. Yeah. And I remember even I forget who it was, but I remember you having an intern like a private internship back in California years ago when you were explaining this to them. And they got all excited. And then everyone's first reaction is to then change their one arm continuum because they've they've been training long enough. And it's not just based on that. There's still need to be training long enough. And then you need to test it to adjust the one arm continuum. This isn't just saying, okay, I've been training long. I'm strong. Now I'm going to change my percentages. Yeah, no, absolutely. When I train my athletes like mostly in St. Louis and one-on-one setting, I would test them all because I didn't want to waste time. I didn't really know they're training background and on and on. So training age was kind of like something I couldn't really establish. So I tested their one arm continuum right of the bat. Okay. And then I had the actual numbers to dictate the rep prescription. But I would still follow my intensity prescription. But there's two ways you can test it. You can test it directly in the gym from the get-go right away. Or you're just a little bit more patient. You use the standard one arm continuum to start. And then over the course of one or most likely two macro cycles. If you really pay attention and you're you're great with your exercise selection that you don't get caught up in prescribing, changing too much, fake bullshit exercises for this. That then there's too much variability. You don't really know what's going on. So then you look at the numbers. Okay. Well, the goal was 80%. But he couldn't do seven. Every time he could only do five. Does it become even like based on exercise? Oh, absolutely. I would think it would be primary exercise. Like generally speaking, most primary multi-join compound will fit in this. But we do know that on average, on front squat and mostly deadlift, then there's huge discurrepancy. A lot of people, a lot of people at let's say 80% of the one arm on deadlift. I'm sorry, at 70% of one arm on deadlift, they won't be able to do 12. They might do seven or eight reps and that's pretty much it. So yes. So there is these variability. But there's no point over complicating things at first. You use the one arm continuum on the primary multi-join compounds, analyzed the data for real. But then do something about that analysis. It's not because sometimes people, sometimes people, they they're all focused with tracking, but then they don't really do anything. They track it and don't do it. Yeah. Yeah. So track it, analyze it, then based on the analysis, do something about it. Because now if you periodically see that on average, on big multi-join compound lift, at 80%, the person is not doing seven reps, but only five. Okay. Well, then I need to change the standard one arm continuum to one that is slightly more advanced. So now the next time I prescribe 80% instead of writing seven and then ended up with a client that now tries to get seven, but now they're not working at 80%, they're working at 75%. No. Now write five reps. So then by naturally, they'll be working at 80% because five reps is now they're 80%. So you need to do it. You need to pay attention. But that's that's I mean, I'm a nerd with that stuff. Like that's what motivates me about training. So you know, like you have different types. Me, I'm more of the nerdy type of numbers type of coach. You have other coaches are more like it's more the movement and the technique and that doesn't drive me as much, right? So teach his own. But if that's something that you're passionate about, like programming and analysis and fine-tuning, you need to track and lies. Do something with it. We'll end on that note. Thanks for tuning in. We'll see you next week on Between Two Rats.

Podcast Summary

Key Points:

  1. The 1RM continuum is a foundational tool for coaches to understand how training intensity (not just reps) drives physiological responses.
  2. Intensity, measured as a percentage of 1RM, directly correlates with training outcomes such as relative strength, hypertrophy, and strength endurance.
  3. The standard 1RM continuum, developed by Charles Pollock and Luke Lege, provides a consistent framework where 1 rep equals 100% and 20 reps equals ~60%, though individual variations exist.
  4. As training age increases, athletes recruit more fast-twitch fibers and fatigue faster, altering their actual performance at given intensities—requiring adjustments to the continuum over time.
  5. The 1RM continuum applies best to compound, multi-joint movements; single-joint or metabolic-focused training requires alternative programming approaches.
  6. Coaches should track actual performance data over time to refine their 1RM continuum and avoid prescribing intensities that don’t match the athlete’s actual capacity.
  7. Percentages are more reliable than fixed rep numbers because they remain consistent across individuals and training stages, allowing better long-term programming.
  8. Strength endurance (13+ reps) is valuable for athletes with high endurance demands but is typically introduced only after building a solid base of strength and coordination.

Summary:

The 1RM continuum is a vital educational and practical tool for coaches to understand how intensity—not just volume or reps—drives training responses. Rooted in research from the 1980s and refined by Charles Pollock and Luke Lege, it defines training outcomes by intensity zones: relative strength (85–100% or 1–5 reps), hypertrophy (70–78% or 8–12 reps), and strength endurance (13+ reps). While the standard continuum provides a reliable baseline, real-world application requires adaptation due to individual differences in training age and fiber recruitment.

Over time, athletes become more efficient at recruiting fast-twitch fibers, causing a decline in performance at high intensities, which means the continuum must be updated through performance tracking. This tool is most effective for compound, multi-joint exercises and should be avoided in metabolic or single-joint training, where fatigue and volume differ significantly. Coaches must use percentages rather than fixed reps to maintain consistency and precision, especially in power or advanced phases.

Tracking actual performance over time allows for accurate adjustments, ensuring training prescriptions align with individual capabilities. For novices, training at moderate reps builds work capacity and fatigue tolerance, preparing them for more advanced intensity work. Ultimately, the 1RM continuum is not a rigid rule but a dynamic, evidence-based guide that, when paired with data-driven observation, enables more effective and individualized strength programming.

FAQs

The 1RM continuum is a tool that links exercise intensity (as a percentage of one-rep max) to training outcomes like strength, hypertrophy, and endurance. It helps coaches design effective training programs by clearly connecting load, reps, and physiological responses.

Intensity, or the percentage of one-rep max, is the primary driver of the training response. The load determines the stimulus, and changes in intensity directly impact outcomes such as strength gains, muscle growth, or endurance development.

1–5 reps are linked to relative strength, 6–8 reps to functional hypertrophy (a blend of strength and size), 8–12 reps to hypertrophy, and 13+ reps to strength endurance. These associations help coaches structure training phases for specific goals.

Individuals vary in training age, genetics, and fiber recruitment. As training progresses, performance changes, so the continuum is adjusted based on actual client data to ensure accurate intensity matching and training progression.

Coaches should use percentages for precision in intensity, especially in power or technical phases. Rep-based loads can be used early in training, but percentages provide a consistent, reliable framework across different training stages and individuals.

No, it applies primarily to compound, multi-joint movements like squats and deadlifts. Single-joint or metabolic-focused training (e.g., hypertrophy or fat loss phases) requires different approaches due to varying fatigue and physiological responses.

Chat with AI

Loading...

Pro features

Go deeper with this episode

Unlock creator-grade tools that turn any transcript into show notes and subtitle files.